Updated about 10 years ago by Jon Goldberg

• Table of contents
• Exporting Raiser's Edge for CiviCRM
  • Export tool - general guide.
  • Constituent Based Exports
    • Contact Information
    • SQL
    • Export tool (NOTE: This ONLY gets constituents).
    • Constituent Codes
    • Solicit Codes
    • Addresses
    • Phones/E-mail/websites
    • Relationships
    • Attributes
    • Other constituent tables:
  • Contribution-related exports
    • Contributions/Gifts
    • Soft Credits
    • Solicitor
    • In Honor/Memorial Of (aka Tributes)
  • And More
    • Tables that Civi doesn't have a direct counterpart for
    • Code Tables/Option Groups/Option Values
  • Deciphering MS SQL
    • Looking Up Functions
    • Looking Up Stored Procedures
    • Addressee/Postal Greeting/E-mail greeting
    • Things I see that RE does better than Civi:

Exporting Raiser's Edge for CiviCRM¶

There are two basic approaches to exporting RE data. There's the built-in export tool, and there's direct SQL interaction. This document will try to cover both approaches where possible. The Export tool has a lower barrier to entry, but a) there's some data you can't export with the tool, and b) the data will be denormalized, requiring additional transformation compared to extracting normalized SQL data.

Export tool - general guide.¶

The Raiser's Edge Export tool is on the left toolbar when you first enter Raiser's Edge.

From the tool, you will create a number of exports. When you first create an export, you'll be asked a number of questions, including Export Type (Constituent, Gift, etc.), a checkbox to include inactive records (check this), and an export file type (select CSV).

For most export, select Constituent as the Export type. This is the "base table" - all records will be joined relative to it.

Constituent Based Exports¶

Contact Information¶

RE differentiates between constituents and non-constituents in their system. If you create a new contact, they're a constituent - but then you might decide to add a spouse or employer record, which is NOT considered a constituent, and doesn't show up in most queries. Notably, non-constituents aren't exported when using the Export tool and your base table is "Constituent".

SQL¶

If extracting directly from SQL, SELECT * FROM RECORDS.

Note that you can extract only constituents by adding WHERE IS_CONSTITUENT = -1. For a Civi migration, I recommend importing all contacts.

Export tool (NOTE: This ONLY gets constituents).¶

Tab 1. General:
- Include all records.
- Head of Household processing: Export both constituents separately.
- Check all of the "Include these Constitutents": Inactive, deceased, no valid address

Tab 2: Output.
First, expand the "Constituent Information" in the left pane, and add every field to the export. Do the export (as a CSV).

Constituent Codes¶

In RE: Found at the bottom of the "Bio 2" tab.
In SQL: CONSTITUENT_CODES maps to "GroupContact". TABLEENTRIES stores the codes ("groups"). In my case, SELECT * FROM [CCR_July_snapshot].[dbo].[TABLEENTRIES] WHERE [CODETABLESID] = 43 did the trick. YMMV - see "deciphering stored procedures" below.

Export as one to many, below.
These map to "groups" in Civi - can also be mapped to "tags" if you don't need to track the begin/end date on them.

No need to export these fields:
System Record ID
Import ID
As of Civi 4.4.6, there's no way to import Group Begin/End dates via API, you need to do it via direct SQL.

Solicit Codes¶

Export as one to many, below.
These can map to groups - but also may map to privacy preferences or custom fields (e.g. Email Only, Do Not Solicit)
Export the "Solicit Code" only (along with the Constituent's System Record ID, of course).

Addresses¶

SQL tables: ADDRESS, CONSTIT_ADDRESS

Addresses are a many-to-many relationship in RE.
Not all addresses in the database are visible in RE. Addresses with a 1 or 7, for instance. Make sure to look your data over and filter those out accordingly.

Phones/E-mail/websites¶

RE is a children of the 90's, so a) phones are tied to addresses, not contacts, and b) e-mails and websites are a type of phone.

Notes:

• You can NOT have duplicate phone types in RE, so no need to try and catch multiple "Home" numbers!
• Oh - except that one contact can have two home phone numbers on two different addresses.
• Don't forget to filter out duplicate numbers/e-mails/etc. when someone puts the same phone number on two different addresses.

This SQL gets me a useful list of phones and e-mail for further processing in Kettle:

SELECT DISTINCT
  CONSTITADDRESSID
, CONSTIT_ID
, PHONETYPEID
, CONSTIT_ADDRESS_PHONES."SEQUENCE" 
, NUM
, DO_NOT_CALL
, TEXT_MSG
FROM CONSTIT_ADDRESS_PHONES
LEFT JOIN PHONES ON CONSTIT_ADDRESS_PHONES.PHONESID = PHONES.PHONESID
LEFT JOIN CONSTIT_ADDRESS ON CONSTITADDRESSID = CONSTIT_ADDRESS.ID

Relationships¶

Relevant SQL table: CONSTIT_RELATIONSHIPS

Relationships are different in Civi and RE in the following significant ways:

• Relationships don't have to have a relationship type.
• The A-B relationship doesn't have to have the same relationship type as B-A (e.g. if my relationship is "parent", the reciprocal relationship could be "son" or "daughter".
• Related contacts need not have their own constituent record (though they can). If they don't have their own constituent record, they nevertheless have a record in RECORDS, they're just not a constituent.
• There need not be a relationship type at all. This doesn't make sense, except that:
• There are hardcoded fields for IS_SPOUSE, HON_MEM_ACKNOWLEDGE, IS_HEADOFHOUSEHOLD, and SOFTCREDIT_GIFTS.

Because relationships aren't necessarily reciprocal, I find it helpful to take my list of invalid relationships and do BOTH of the following:

• Look up the RELATIONSHIP_TYPE against the name_b_a field in civicrm_relationship_type.
• Look up the RECIP_RELATIONSHIP_TYPE against both name_a_b and name_b_a in civicrm_relationship_type.

Attributes¶

Attributes are the RE equivalent of custom fields. However, unlike custom fields, they can also have a "date" value and a "comments" value. While this can be replicated in Civi via multi-record custom field groups, ideally the data is evaluated attribute by attribute.

Valuable information about the setup of the attributes is available in RE from Config > Attributes.

• The analogous field to civicrm_custom_field is AttributeTypes.
• AttributeTypes.CODETABLESID gives a lookup for the RE "option group" that contains valid options for that attribute.
• All constituent attribute data is stored in the table ConstituentAttributes. Note that it's stored in a Key-Value Pair-style table - you'll need to do a bunch of SQL queries, or run a Kettle "Row Denormaliser" step to get this data in order.

Here's my preliminary SQL to export attributes from RE:

SELECT
ca.PARENTID as external_identifier
, ca.ATTRIBUTETYPESID
, at.DESCRIPTION as Category
, TABLEENTRIES.LONGDESCRIPTION as Description
, TEXT
, NUM
, DATETIME
, CURRENCY
, "BOOLEAN" 
, COMMENTS
, ca.ATTRIBUTEDATE
FROM ConstituentAttributes ca
JOIN AttributeTypes at ON ca.ATTRIBUTETYPESID = at.ATTRIBUTETYPESID
LEFT JOIN TABLEENTRIES ON ca.TABLEENTRIESID = TABLEENTRIES.TABLEENTRIESID

note: In the SQL above, "PARENTID" and not "ConstitID" is the correct foreign key to link this to the contact.

To get a list of option values out of RE for the attributes, use this SQL:

SELECT
DESCRIPTION
, at.CODETABLESID
, LONGDESCRIPTION
FROM TABLEENTRIES te 
LEFT JOIN AttributeTypes at ON te.CODETABLESID = at.CODETABLESID
ORDER BY DESCRIPTION

Attributes can be multi-record custom fields by their nature, so you have to account for that. Here's some alpha-grade SQL for sussing out which fields have multi-record custom fields:

SELECT ATTRIBUTETYPESID, PARENTID, COUNT(LONGDESCRIPTION)
FROM ConstituentAttributes ca
JOIN TABLEENTRIES te ON ca.TABLEENTRIESID = te.TABLEENTRIESID
GROUP BY PARENTID, ATTRIBUTETYPESID
HAVING COUNT(LONGDESCRIPTION) > 1
ORDER BY ATTRIBUTETYPESID

note: In Civi 4.5+, you could conceivable use "EntityRef" functionality to facilitate chained selects of OptionValue lists. That would let you create a multi-record custom field group that would very closely map how Attributes work in RE - but you'd have all the disadvantages of multi-record custom fields.

Other constituent tables:¶

Skip these tables:

• Spouse
• Gifts
• First Gift, Last gift, Largest Gift
• Actions
• First Action, Last Action
• Summary Information

Contribution-related exports¶

Contributions/Gifts¶

Contributions (in RE parlance: Gifts) are complicated beasts!

Here are some relevant database tables and their equivalent in Civi:
GIFT civicrm_contribution
GiftSplit civicrm_line_item
CAMPAIGN Roughly maps to Campaign. Your mapping may vary and/or include custom fields.
APPEAL Also roughly maps to Campaign (or Source). Your mapping may vary and/or include custom fields.
FUND Roughly maps to Financial Type. Your mapping may vary and/or include custom fields.

Note that gift type is hardcoded into a function called "TranslateGiftType) - so you may want to include that function in your SQL, e.g.:

SELECT
gs.GiftId
, g.CONSTIT_ID
, gs.Amount
, g.DTE as gift_date
, FUND.DESCRIPTION as fund
, CAMPAIGN.DESCRIPTION as campaign
, APPEAL.DESCRIPTION as appeal
, g.PAYMENT_TYPE
, g.ACKNOWLEDGE_FLAG
, g.CHECK_NUMBER
, g.CHECK_DATE
, g.BATCH_NUMBER
, g.ANONYMOUS
, gst.LONGDESCRIPTION as giftsubtype
, g.TYPE
, DBO.TranslateGiftType(g.TYPE) as type2
FROM GiftSplit gs
LEFT JOIN FUND on gs.FundId = FUND.id
LEFT JOIN APPEAL on gs.AppealId = APPEAL.id
LEFT JOIN CAMPAIGN on gs.CampaignId = CAMPAIGN.id 
LEFT JOIN GIFT g on gs.GiftId = g.ID
LEFT JOIN TABLEENTRIES gst on g.GIFTSUBTYPE = gst.TABLEENTRIESID

Payment Type is also hard-coded, it seems:
1 Cash
2 Personal Check
3 Business Check
4 Credit Card
6 Direct Debit
8 Other

Soft Credits¶

Stored in GIFTSOFTCREDIT. RE does NOT have the concept of a soft credit type - which is fine.

SELECT
, GiftId
, ConstitId
, Amount
, 'Soft Credit' as soft_credit_type
FROM GiftSoftCredit

Solicitor¶

I imported these as soft credits, but a different TYPE of soft credit. Here's the SQL I used to get the data out of RE:

SELECT
ParentId as gift_id
, SolicitorId as soft_creditee_external_identifier
, Amount
, 'Solicitor' as soft_credit_type
FROM GiftSolicitor

In Honor/Memorial Of (aka Tributes)¶

As of CiviCRM 4.5, In Honor/Memorial of is considered a form of soft credit. In RE, they're still separate, and are called Tributes. The structure is a little more complex - the table structure is Constituent <-> Tribute <-> Gift_Tribute <-> Gift. Civi is Contact <-> Soft Credit <-> Contribution.

Here is some preliminary SQL that pulls tribute data suitable for transformation and import to Civi as ContributionSoft entities. Note that CiviCRM doesn't have a concept of a "Description" but does have the concept of a PCP Note, so I'm importing the description there - in the future, I could see the argument for Civi exposing the PCP Note as a description.

SELECT
gt.GIFT_ID
, gt.TRIBUTE_TYPE
, t.DESCRIPTION
, t.RECORDS_ID as tributee_extenal_identifier
, te.LONGDESCRIPTION as tribute_type
FROM GIFT_TRIBUTE gt
JOIN TRIBUTE t ON gt.TRIBUTE_ID = t.ID
LEFT JOIN TABLEENTRIES te on gt.TRIBUTE_TYPE = te.TABLEENTRIESID

And More¶

Tables that Civi doesn't have a direct counterpart for¶

• Aliases (stores Maiden Name and d/b/a - unsure how to import into Civi just yet)
• Solicitor Goals - Can be found on an RE contact record on "Bio 1" tab by clicking "Details" next to "Is a Solicitor" checkbox. Don't know how to use them.

Open each CSV file in Excel or similar. Sort each field by ascending AND descending to see if any data is stored in that field. If every record has no data or the same data, delete it - it's not being tracked in the current system. If you see only one or two records with a particular field, they're also probably fine to go, but check with the client first.

Next, strip out all of the constituent information except for primary/foreign keys. I like to keep in First/Middle/Last name just for human readability though. So leave in those three fields, plus any field with the word "ID" in it. This is your base constituent info, and will be in every other export you do.

Now comes the fun part! Export each table, one at a time, by adding those fields to an export that already includes the base constituent info.

For one-to-many relationships, the system will ask you how many instances of the information to export. I default to 12, then look over the data to see how many are actually used, then re-export with a higher or lower number.

I also remove records that don't contain the relevant data. For instance, when exporting Solicit Codes, I sort by the first Solicit Code. Then I scroll down past the folks that have Solicit Codes to those who have none, and delete the rows for folks who have none.

Note that for simplicity's sake, RE contains many views of the tables that, if you export them all, you'll have redundant data. There's no need to export "First Gift", "Last Gift", or "Largest Gift" - simply export all gifts. Likewise for "Preferred Address".

When exporting one-to-many tables that themselves contain one-to-many tables (e.g. Addresses contains Phones), do NOT select 12 of each! That means you're exporting 144 phone numbers per record. First determine the maximum number of addresses being tracked, re-export with that number, THEN export with phone numbers. Also, it's reasonable to export with 5 phone numbers per address.

NOTE: Letters sent is incomplete, there's more than 12 letters to some folks!

GIFTS is related to constituent on the last column (Constituent System Record ID)

Code Tables/Option Groups/Option Values¶

If you're extracting data from the SQL back-end, you'll see that the RE equivalent to Civi option groups is "code tables". There's two functions that handle lookups: dbo.GetTableEntryDescription and dbo.GetTableEntryDescSlim. To determine where the data is being accessed by the function, see "Deciphering MS SQL", below. Use the "lTableNumber" passed to those functions and you'll find your data in dbo.CODETABLES (comparable to civicrm_option_group), dbo.CODETABLEMAP and dbo.TABLEENTRIES (comparable to civicrm_option_value).

Deciphering MS SQL¶

SQL Server Profiler is a tool that lets you spy on SQL statements passed to MS SQL, which is good for determining where certain data lives. However, RE depends on functions and stored procedures, so sometimes the SQL won't tell you exactly where to look.

Looking Up Functions¶

These are embedded in SQL and have a nomenclature like: dbo.GetTableEntryDescSlim. Find them in SQL Server Management Studio: database > Programmability > Functions > Scalar-valued Functions.

Looking Up Stored Procedures¶

If, in the profiler, taking a certain action shows a command like this:
These have a syntax like:

exec sp_execute 48,43,'Acknowledgee'

You're dealing with a stored procedure. You need to find the corresponding exec sp_prepexec command (in this case, the one with a 48). In this case, it looks like:

declare @p1 int
set @p1=48
exec sp_prepexec @p1 output,N'@P1 int,@P2 varchar(255)',N'SELECT  Top 1 TABLEENTRIESID  FROM DBO.TABLEENTRIES WHERE CODETABLESID = @P1 AND LONGDESCRIPTION = @P2  ',43,'Acknowledgee'
select @p1

Note that there's a tool called "SQL Hunting Dog", a free plug-in for SQL Server Management Studio, which makes locating stored procedures, etc. easier.

Addressee/Postal Greeting/E-mail greeting¶

RE has a much wider variety of greeting formats out-of-the-box. The "spouse ID" is stored on the record to enable quick lookups of addressee greetings that include the spouse.

See also:
http://support.littlegreenlight.com/kb/migration/migrating-from-the-raisers-edge-to-lgl

Things I see that RE does better than Civi:¶

• Better greetings/salutations UI out of the box. In Civi, you must in-line edit the greetings, then press "Edit" next to the greetings, and even then you only see the tokens you'll use. RE lets you edit with no clicks, and parses the tokens for you.
• The equivalent of option values are stored with their id, not their value. This isn't a big deal, but it DOES make data transformation easier in RE, and I suspect it makes their equivalent of pseudoconstant code easier to read.
• There's a lot more data stored in many-to-many tables. For instance, job titles are stored in the relationship tab, reflecting the fact that someone can have more than one job.