Project

General

Profile

Amazon SES for CiviCRM » History » Version 13

Jon Goldberg, 05/06/2015 05:37 PM

1 1 Jon Goldberg
h1. Amazon SES for CiviCRM
2 1 Jon Goldberg
3 2 Jon Goldberg
_Pre-requisites: DNS access_
4 2 Jon Goldberg
5 2 Jon Goldberg
* Have client sign up for Amazon AWS, which involves credit cards, identity verification, etc.
6 2 Jon Goldberg
* Ideally, have them click on "SES" at the AWS console, to do the phone verification.
7 2 Jon Goldberg
* Log onto AWS, select SES.  Note that you only have sandbox access at this time.
8 2 Jon Goldberg
* Click on "SMTP Settings" on the left, record the server info, generate SMTP credentials and record those too.
9 2 Jon Goldberg
* Click on "Verified Senders: Domains".  Click "Verify a new Domain".  Enter the client's domain name; also click "Generate DKIM settings".
10 2 Jon Goldberg
* Download these credentials, don't just copy/paste from the screen, because they tend to get cut off.
11 2 Jon Goldberg
* Update the DNS with the verification credentials.
12 5 Jon Goldberg
** *NOTE: This will take several hours (3-4?), even after DNS has propagated.*
13 3 Jon Goldberg
* Also add your own e-mail address the the verified sender - email address list.  This just requires receiving a verification email. You need this because while you're still in sandbox mode, you can only send to verified addresses.  Note that if your normal mail account has greylisting, you'll probably want to use an alternate account here, like GMail.
14 4 Jon Goldberg
15 4 Jon Goldberg
You now have two options for SMTP setup:
16 10 Jon Goldberg
17 10 Jon Goldberg
h3. SMTP direct from CiviCRM
18 10 Jon Goldberg
19 4 Jon Goldberg
* Set up the SMTP Outbound settings in CiviCRM to use the Amazon SMTP server.  If you do this, know that STARTTLS isn't supported, so prefix the SMTP server with @ssl://@ and select a port of @465@.
20 1 Jon Goldberg
* Click "Save and Test".
21 4 Jon Goldberg
* You may not see an error on the page - so check the ConfigAndLog log for error messages if necessary.
22 1 Jon Goldberg
23 10 Jon Goldberg
h3. SMTP relayed through Postfix (recommended)
24 4 Jon Goldberg
25 10 Jon Goldberg
Postfix will give higher performance on large mailings, and also does a much better job of handling resends, greylisting, etc.  This should be implemented wherever possible.
26 1 Jon Goldberg
27 11 Jon Goldberg
28 1 Jon Goldberg
* Install Postfix.
29 11 Jon Goldberg
* Paste this at the bottom of @/etc/postfix/main.cf@:
30 12 Jon Goldberg
<pre>
31 11 Jon Goldberg
#jon@palantetech.coop SES setup
32 11 Jon Goldberg
relayhost = email-smtp.us-west-1.amazonaws.com:25
33 11 Jon Goldberg
smtp_sasl_auth_enable = yes
34 11 Jon Goldberg
smtp_sasl_security_options = noanonymous
35 11 Jon Goldberg
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
36 11 Jon Goldberg
smtp_use_tls = yes
37 11 Jon Goldberg
smtp_tls_security_level = encrypt
38 11 Jon Goldberg
smtp_tls_note_starttls_offer = yes
39 11 Jon Goldberg
smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt
40 11 Jon Goldberg
41 11 Jon Goldberg
#jon@palantetech.coop rate limiting to 4 messages/second for now
42 11 Jon Goldberg
smtp_destination_rate_delay = 1s
43 11 Jon Goldberg
smtp_destination_concurrency_limit = 4
44 12 Jon Goldberg
</pre>
45 12 Jon Goldberg
46 12 Jon Goldberg
* Create a file with credentials at @/etc/postfix/sasl_passwd@ in the format:
47 12 Jon Goldberg
<pre>
48 12 Jon Goldberg
email-smtp.us-east-1.amazonaws.com:25 username:password
49 12 Jon Goldberg
</pre>
50 13 Jon Goldberg
* Run @postmap /etc/postfix/sasl_passwd@.
51 10 Jon Goldberg
52 10 Jon Goldberg
h2. Bounce processing setup
53 10 Jon Goldberg
54 10 Jon Goldberg
See [[Set up local bounce processing]].
55 10 Jon Goldberg
56 10 Jon Goldberg
57 10 Jon Goldberg
h2. Testing
58 10 Jon Goldberg
59 7 Jon Goldberg
* To test bounce processing, set up a test group made up of at least one verified address and a test contact with the e-mail address "bounce@simulator.amazonses.com".
60 1 Jon Goldberg
* Send a mailing to that group.  You can speed up testing by manually running the "Send Scheduled Mailings" and "Fetch Bounces" scheduled jobs.
61 1 Jon Goldberg
* Don't forget to request production access when you're done!
62 6 Jon Goldberg
63 10 Jon Goldberg
h3. SPECIAL NOTE FOR EC2 INSTANCES
64 10 Jon Goldberg
65 9 Jon Goldberg
EC2 severely throttles outgoing mail on ports 25/465/587.  You need to submit a request to Amazon to have this throttle lifted.  This is separate from any user-configurable firewalling!  You can do that (and set up PTR) here: https://portal.aws.amazon.com/gp/aws/html-forms-controller/contactus/ec2-email-limit-rdns-request
Go to top
Add picture from clipboard (Maximum size: 40 MB)