PT Commons

h1. Exporting Raiser's Edge for CiviCRM

You can export all of the data using the Raiser's Edge Export tool.  You'll see it on the left toolbar when you first enter Raiser's Edge.

From the tool, you will create a number of exports.  When you first create an export, you'll be asked a number of questions, including Export Type (Constituent, Gift, etc.), a checkbox to include inactive records (check this), and an export file type (select CSV).

For the Export type, start with Constituent.  This is the "base table" - all records will be joined relative to it.

h2. Constituent Based Exports

h3. Contact Information

RE differentiates between constituents and non-constituents in their system.  If you create a new contact, they're a constituent - but then you might decide to add a spouse or employer record, which is NOT considered a constituent, and doesn't show up in most queries/exports/etc.

If extracting directly from SQL, @SELECT * FROM RECORDS@.

Note that only those records where IS_CONSTITUENT = -1 are constituents - but in Civi there's no distinction, so import them all.

Create a new export. (NOTE: This ONLY gets constituents).

Tab 1. General:

- Include all records.

- Head of Household processing: Export both constituents separately.

- Check all of the "Include these Constitutents": Inactive, deceased, no valid address

Tab 2: Output.

First, expand the "Constituent Information" in the left pane, and add every field to the export.  Do the export (as a CSV).

h3. Constituent Codes

In RE: Found at the bottom of the "Bio 2" tab.

In SQL: CONSTITUENT_CODES maps to "GroupContact".  TABLEENTRIES stores the codes ("groups").  In my case, @SELECT *  FROM [CCR_July_snapshot].[dbo].[TABLEENTRIES] WHERE [CODETABLESID] = 43@ did the trick.  YMMV - see "deciphering stored procedures" below.

Export as _one to many_, below.

These map to "groups" in Civi - can also be mapped to "tags" if you don't need to track the begin/end date on them.

No need to export these fields:

System Record ID

Import ID

As of Civi 4.4.6, there's no way to import Group Begin/End dates via API, you need to do it via SQL.

h3. Solicit Codes

Export as _one to many_, below.

These can map to groups - but also may map to privacy preferences or custom fields (e.g. Email Only, Do Not Solicit)

Export the "Solicit Code" only (along with the Constituent's System Record ID, of course).

h3. Addresses

SQL tables: ADDRESS, CONSTIT_ADDRESS

Addresses are a many-to-many relationship in RE.

h3. Relationships

Relationships are different in Civi and RE in the following significant ways:

* Relationships don't have to have a relationship type.

* The A-B relationship doesn't have to have the same relationship type as B-A (e.g. if my relationship is "parent", the reciprocal relationship could be "son" or "daughter".

* Most importantly, related contacts need not have their own constituent record (though they can).  If they don't have their own constituent record, they nevertheless have a record, just not one that's available from within the normal queries/lookups.

h3. Attributes

Attributes are the RE equivalent of custom fields.  However, unlike custom fields, they can also have a "date" value and a "comments" value.  While this can be replicated in Civi via multi-record custom field groups, ideally the data is evaluated attribute by attribute.

Valuable information about the setup of the attributes is available in RE from *Config > Attributes*.

*note:*  I'm currently evaluating the use of CiviCRM 4.5+'s "EntityRef" functionality to facilitate chained selects of OptionValue lists.  If this is successful, that would facilitate creating a single multi-record custom field group (with the fields "Attribute", "Description", "Date", "Comments") that would work VERY similarly to how RE handles attributes.

h3. Other constituent tables:

Skip these tables:

* Spouse

* Gifts

* First Gift, Last gift, Largest Gift

* Actions

* First Action, Last Action

* Summary Information

h3. Tables that Civi doesn't have a direct counterpart for

* Aliases (stores Maiden Name and d/b/a - unsure how to import into Civi just yet)

* Solicitor Goals - Can be found on an RE contact record on "Bio 1" tab by clicking "Details" next to "Is a Solicitor" checkbox.  Don't know how to use them.

Open each CSV file in Excel or similar.  Sort each field by ascending AND descending to see if any data is stored in that field.  If every record has no data or the same data, delete it - it's not being tracked in the current system.  If you see only one or two records with a particular field, they're also probably fine to go, but check with the client first.

Next, strip out all of the constituent information except for primary/foreign keys.  I like to keep in First/Middle/Last name just for human readability though.  So leave in those three fields, plus any field with the word "ID" in it.  This is your base constituent info, and will be in every other export you do.

Now comes the fun part!  Export each table, one at a time, by adding those fields to an export that already includes the base constituent info.

For one-to-many relationships, the system will ask you how many instances of the information to export.  I default to 12, then look over the data to see how many are actually used, then re-export with a higher or lower number.

I also remove records that don't contain the relevant data.  For instance, when exporting Solicit Codes, I sort by the first Solicit Code.  Then I scroll down past the folks that have Solicit Codes to those who have none, and delete the rows for folks who have none.

Note that for simplicity's sake, RE contains many views of the tables that, if you export them all, you'll have redundant data.  There's no need to export "First Gift", "Last Gift", or "Largest Gift" - simply export all gifts.  Likewise for "Preferred Address".

When exporting one-to-many tables that themselves contain one-to-many tables (e.g. Addresses contains Phones), do NOT select 12 of each!  That means you're exporting 144 phone numbers per record.  First determine the maximum number of addresses being tracked, re-export with that number, THEN export with phone numbers.  Also, it's reasonable to export with 5 phone numbers per address.

NOTE: Letters sent is incomplete, there's more than 12 letters to some folks!

GIFTS is related to constituent on the last column (Constituent System Record ID)

h3. Code Tables/Option Groups/Option Values

If you're extracting data from the SQL back-end, you'll see that the RE equivalent to Civi option groups is "code tables".  There's two functions that handle lookups: dbo.GetTableEntryDescription and dbo.GetTableEntryDescSlim.  To determine where the data is being accessed by the function, see "Deciphering MS SQL", below.  Use the "lTableNumber" passed to those functions and you'll find your data in dbo.CODETABLES (comparable to civicrm_option_group), dbo.CODETABLEMAP and dbo.TABLEENTRIES (comparable to civicrm_option_value).

h2. Deciphering MS SQL

SQL Server Profiler is a tool that lets you spy on SQL statements passed to MS SQL, which is good for determining where certain data lives.  However, RE depends on functions and stored procedures, so sometimes the SQL won't tell you exactly where to look.

h3. Looking Up Functions

These are embedded in SQL and have a nomenclature like: dbo.GetTableEntryDescSlim. Find them in SQL Server Management Studio: database > Programmability > Functions > Scalar-valued Functions.

h3. Looking Up Stored Procedures

If, in the profiler, taking a certain action shows a command like this:

These have a syntax like:

<pre>

exec sp_execute 48,43,'Acknowledgee'

</pre>

You're dealing with a stored procedure.  You need to find the corresponding @exec sp_prepexec@ command (in this case, the one with a 48).  In this case, it looks like:

<pre>

declare @p1 int

set @p1=48

exec sp_prepexec @p1 output,N'@P1 int,@P2 varchar(255)',N'SELECT  Top 1 TABLEENTRIESID  FROM DBO.TABLEENTRIES WHERE CODETABLESID = @P1 AND LONGDESCRIPTION = @P2  ',43,'Acknowledgee'

select @p1

</pre>

h3. Addressee/Postal Greeting/E-mail greeting

RE has a much wider variety of greeting formats out-of-the-box.  The "spouse ID" is stored on the record to enable quick lookups of addressee greetings that include the spouse.

See also:

http://support.littlegreenlight.com/kb/migration/migrating-from-the-raisers-edge-to-lgl

h3. Things I see that RE does better than Civi:

* Better greetings/salutations UI out of the box.  In Civi, you must in-line edit the greetings, then press "Edit" next to the greetings, and even then you only see the tokens you'll use.  RE lets you edit with no clicks, and parses the tokens for you.

* The equivalent of option values are stored with their id, not their value.  This isn't a big deal, but it DOES make data transformation easier in RE, and I suspect it makes their equivalent of pseudoconstant code easier to read.